SERVICE CONDITIONS

~ If you want these blades Heat Treated then you need to add that through the Heat Treating page.

~ Price is just for Material and cutting. There is no charge for CNC plasma cutting. This cost is built into the material charge.

~ There Could be a cut charge for any order that totals less than 5 blades per alloy/thickness. They do not have to be of the same profile design but the alloy and thickness do need to be the same. This is to cover setup, programing and cutting if the order is under 5 blades.

~ All blades will be cut a tad larger to allow for clean up and removal of HAZ.

~ Plasma cut pin holes are not precise but generally will fit the pin with some slop. Drilling holes cost more but will be drilled to the size drawn before heat treating. Please make sure your pin size drawn is a common size for a drill, we will contact you if there is any issue with the requested size.

~ Don't forget to upload your design file in the provided area. DXF is the preferred format but sketches and scans/pictures will work as well.

~ There are no refunds or cancellations once we have started processing your order.

~ Any overcharges or errors in pricing will be refunded or invoiced upon discovery.

~ Any additions or major changes to a pending order will require a new order to be placed.

~ In Stock material fluctuates, but we do try and keep it updated. If your order exceeds the material we have on hand we will notify you with a few options.

~ To calculate the square inches of your blade: Take your blade length in inches and your blade width in inches and multiply the two numbers together. If the number is not a whole number then round it up to the nearest whole number. For example if you multiplied your length times your width and got the number 35.28", you would round this number up to 36 and that would be the square inches for your blade.

If you have any questions don’t hesitate to ask me. Thank you - JT